Solutions — plumbing and heating contractors
Pumps, piping, boilers: in a mechanical room, equipment vibration reaches the structure through its supports and hangers. Deflection supplies plumbing and heating contractors with the pump stands, hangers and pads that stop it at the source, with a technical sheet for every product.
Your situation
Circulation pumps and vertical in-line pumps: pump stands, inertia bases, rubber floor mounts and spring floor isolators.
Spring or neoprene hangers, selected according to the load carried by each hanger rod.
Sections 22 05 48 or 23 05 48: we give you the technical sheets to submit for approval.
Neoprene pads, waffle pads and isolation grommets for supports and fasteners.
Products
The VPS stand takes vertical in-line pumps with 1 ½ to 8 in flanges. For floor-mounted equipment, RMD mounts cover 33 to 2,200 lb and SM1 spring isolators cover 25 to 700 lb. The structural steel inertia base, custom-built in Quebec, is supplied with seismic spring isolators calculated for the equipment.
Pump stand system with built-in vibration isolation for industrial and commercial pumping installations.
View product →
Complete structural steel inertia base with reinforcing bars, custom-built in Quebec and supplied with seismic spring isolators calculated for the equipment.
View product →
Elastomer support mount for seating and vibration isolation of mechanical equipment.
View product →
Spring floor isolator with seismic restraint, for floor-mounted mechanical equipment in seismic zones.
View product →SH, SHE1 and SHL1 spring hangers cover 20 to 735 lb per hanger, for rods up to ⅜, ½ and ¾ in. The EHD neoprene hanger covers 33 to 370 lb.
Spring hanger isolator for mechanical equipment requiring enhanced vibration isolation.
View product →
Spring hanger from the SH family, SHE1 variant, for mechanical equipment suspension applications.
View product →
Spring hanger isolator with built-in travel limiter (SHL1) for greater deflection control.
View product →
Rubber hanger for hanging ducts, piping and light mechanical equipment.
View product →Neoprene pads in 26 sizes, waffle pads that can be cut to size and vibration isolation grommets.
Family of neoprene pads offering several configuration options depending on load and application.
View product →
Pad designed to absorb vibration from floor-mounted mechanical equipment.
View product →
Fastening accessories (isolation washers) used alongside anti-vibration isolators and supports.
View product →How it works
Through the form below or by email, with the list of equipment to isolate or the noise problem to solve.
With the technical sheets of the proposed products, ready to submit for approval.
We supply the products, or we take charge of the project through to installation.
Describe your project — a specialist replies within 24-48 business hours.
Frequently asked questions
It depends on the load carried by each hanger and on the deflection required by the specification. SH, SHE1 and SHL1 spring hangers cover 20 to 735 lb per hanger, for rods up to ⅜, ½ and ¾ in. The EHD neoprene hanger covers 33 to 370 lb, with a deflection of 0.4 to 0.5 in.
The VPS series is a steel stand for vertical in-line pumps. It comes in 8 models and 2 stand sizes, for pump flanges from 1 ½ to 8 in.
Yes. Every product has its own technical sheet in English and in French, downloadable from the product page and from the catalogue. It gives the loads, deflections and dimensions per model.
We reply to your drawings and specifications within 24-48 business hours. Send us the equipment list and the specification requirements: the quote comes with the technical sheets of the proposed products.
