Neoprene pads
Pad designed to absorb vibration from floor-mounted mechanical equipment.
Deflection WP Series neoprene waffle pads: simple and effective
Deflection WP Series neoprene waffle pads are a practical way to reduce vibration. Their waffle design with built-in suction cups attenuates vibration well without bolting. With a load range of 1 to 25 psi, they suit pumps, motors, air-conditioning units, generators and fans.
Used for pumps, motors, air-conditioning units, generators, fans, etc.
| Size (in) | Max. load per pad (lb) | (kg) |
|---|---|---|
| 2 x 2 | 100 | 45 |
| 3 x 3 | 225 | 102 |
| 4 x 4 | 400 | 181 |
| 6 x 6 | 900 | 408 |
| 12 x 12 | 3,600 | 1,633 |
| 18 x 18 | 8,100 | 3,674 |
Maximum loads at 25 psi, based on 40-durometer WP pads.
The WP pad goes between the equipment and the floor to absorb vibration at the source, which reduces its transmission to the slab and the building structure.
Yes, the pads can be cut to the bearing surface of your equipment. The technical sheet gives the sizes and the maximum loads.
The SN Series combines steel and neoprene for more load capacity. The WP Series is a standard neoprene pad. The choice depends on the load per square inch.
In most cases, the weight of the equipment is enough. For equipment that tends to move, mechanical fastening can be added. Our team can advise you.
